Then connect the white wire to the top terminal. Connect the green wire to the bottom “L” shaped terminal. Hold the plug upside down with the “L” shaped proged at the bottom. If you connect a four-pronged plug, you will have to connect all the wires. Step four: Connecting to a four-pronged plug Lastly, connect the green wire to the bottom terminal. Then connect the black wire to the top right terminal and tighten the terminal screw. Ensure all the wire strands are concealed under the screw head. Slide the exposed end of the red wire to the top left terminal and tighten the terminal screw. Hold the plug upside down if you are connecting to a three-pronged plug. Step three: Connecting to a three-pronged plug Then loosen the screws on the plug terminals. Then remove the back of the housing and then line the wires to the front of the housing. The next step is to open the plug housing by loosening the screws holding it. The white wire is usually only present in 220 v appliances. These four wires will be red, green, black, and white in color. Strip ¾ inch of insulation off the ends of the four wires. The first thing to do is use wire cutters to strip the four wires you want to connect the plug with. Here is a step-by-step guide on how to wire a 220v plug with four wires. Once you have your four-pronged plug, it is time to connect it.įive steps of wiring a 220v plug with 4 wires It is worth noting that the neutral and ground wires aren’t the same. The four are two hot wires, a neutral, and a ground wire. Since 1996 most 220 v electrical appliances will require four wires. Obviously, this will depend on whether the socket accommodates four prongs. If you have an electrical appliance that requires a 220v plug, then you may need to buy a four-pronged plug to go into the socket.
0 Comments
Leave a Reply. |